|
|
|
| |
 |
Partitipation at National Programmes |
 |
|
| 3.8.2. MASCS |
General description |
Detailed description |
Results Presentation
Results Presentation
| The final result is the realization of an experimental model for the screw compressor equipment powered by a piston engine fuelled with natural gas, named MOTOCOMPRESOR MCS 15.6. with the following product description.
PRODUCT DESCRIPTION
MOTOCOMPRESOR MCS 15.6.
DESCRIPTION AND USER AREA
This product realize the compression of the natural gas or extraction gas with an screw compressor powered by a thermic engine fuelled with natural gas that already exist on the functioning location ( gas compressing station, oil park etc.), entire group being electronically controlled by an automation installation. The use of the primary energy founded on the location lead to o substantial rise of energy efficiency, and also a decrease of the environmental pollution.
INCDT COMOTI Bucharest can realize such equipments at different parameters depending on users demands.
TEHNICAL FEATURES
The parameters of the screw compressor type CF 128 GK
- Compressed natural gas flow: 15 000 m 3/day (625 mc/h)
- Exit pression of the natural gas: 6 bar
- Isentropic exponent: 1,279
- Suction pressure: 0,6…1 bara
- Suction temperature: -30…40°C
- Suction gas filter fineness: 20µm
- Built in volume ratio: 5,18
- Gear ratio: 1,805
- Exit temperature for the natural gas: max. 80°C
- Oil for compressor lubrication and cooling: Glygoyl 22, H68EP or similar
- Maximum flow of oil injected in compressor : 68 litri/min
- Oil capacity : 200 litri
- Oil injection temperature : 55°C
- Motor and compressor shaft revolution: 1600 rpm
The parameters of the THERMIC ENGINE CATERPILLAR type G3304-NA
- Nominal flywheel power engine that runs on natural gas: 64 kw (87 CP)
- Compression ratio: 10,5
- Bore/Stroke: 121 / 152
- Displacement: 7 litri
- 4-Stroke-Cycle
- Fuel gas exhaust trail: cool
- Pressure drop of exhaust gas path: max. 11 kPa
- Exhaust pipe diameter: max.90 mm
- Voltage: 24V
- Inner diameter of the gas pipeline: 1’’
- Fuel gas inlet pressure: 15…34 kPa
- Fuel consumption:
- 24,7 mc/h Load 100%
- 19,3 mc/h Load 75%
- 14,1 mc/h Load 50%
- Oil capacity: 18,9 liters
- Lube Oil type: Caterpillar NGEO, M10W40 or similar
- Battery charging system 24V
- Command and control System (PLC) + speed sensor+ gas valve 24V
- Ignition system: Altronic V
- Capacity of the cooling system: 17 liters
- Temperature of the exhaust gases: 439…532 ºC
- Lube oil pressure at idle: 175 kPa
- Nominal pressure for oil lubrication: 420 kPa
- Shipping Weight: 3200 kg
|
|
General description |
Detailed description |
Results Presentation
|
|
| |
|
|
|
|
|
|
|
